EDAN SE-1200 Express - Page 73

SE-12 Series Electrocardiograph User Manual
Operation Instructions for Exercise ECG
3. If more than one fault occurs, only the hint information with a
higher priority will be displayed.
Lead X Off, DEMO, Module Error, Overload, TM-400 Treadmill
hint information (including Lanyard Off, Transmission
Communication Error, Transducer Error, Incline Error, Great
Interference, No Speed Signal, Abnormal Speed, UART Error)
NOTE:
D
Hint Information2
1.
Lead X Off has a high priority to be displayed. The other hint
information of Hint Information2 has a normal priority to be
displayed.
2. If more than one fault occurs, the hint information which has
the same priority will be displayed in a circulative mode.
3. If more than one fault occurs, the hint information which has a
high priority will be displayed.
E
Current Protocol
The selected protocol name
F
Total Time
The total time counted from the beginning of the pretest phase to
the end of the exercise test.
G
Current Phase and
The current phase and stage of the exercise test
Stage
NOTE: Before or after the exercise test, state name is displayed.
The left number is the total exercise phase time, which is counted
H
Total Exercise Phase
from the beginning to the end of the exercise phase.
Time and Stage Time
The right number is the stage time, which shows the running time
of the current stage.
Current Speed or
When the treadmill is used, the current speed, grade and workload
of the treadmill will be displayed on the main screen; When the
I
Rotation Speed, Grade
ergometer is used, the current rotation speed and power of the
or Power, Workload
ergometer will be displayed on the main screen.
J
Current Time
Current examination time.
K
Battery Symbol
Identify the current capacity of the battery
Systolic Blood Pressure
The
left number is the
systolic blood pressure, and the right
L
and Diastolic Blood
number is the diastolic blood pressure.
Pressure
If a wireless network is connected successfully, an icon appears on
M
WIFI
the main screen.
: Poor signal (-85dBm ＜transmit power ≤-70dBm);
- 60 -