EDAN SE-1200 Express - Page 75

SE-12 Series Electrocardiograph User Manual
Operation Instructions for Exercise ECG
No testing:
This button changes into Hold, and it does not respond to any
operations.
Test is terminated:
This button changes into Trans, press it to transmit the file to the
PC.
V
Patient
Press to open the Patient Information window. It is invalid in the
exercise test.
W
ECG waveforms
Display real-time ECG waveforms.
Press to display the 3-lead average template waves which are
updated every 10 seconds and the positions of the calibration
lines. The Template button will change into the ST Trend button.
X
Average Template
The 3 leads can be selected in the Lead Setup window of the
exercise test.
Press
or
to
magnify or minify the selected lead
average wave.
During the exercise test:
This button changes into ST Trend on the Average Template
Y
ST Trend Button / Exit
screen, press it to display the 3-lead ST trends.
No testing or test is terminated:
This button changes into Exit, press it to exit the main screen of
the exercise test.
Z
Closeup View of
Closeup view of the selected lead.
Waveforms
A1
Gain and Speed
Press to set the gain to 20mm/mV or 40mm/mV.
Press to set the speed to 50mm/s or 100mm/s.
11.2 Operation Preparations
1. Turn on the electrocardiograph
NOTE: Turn on the electrocardiograph before connecting the treadmill or the ergometer;
or else, the start-up of the electrocardiograph may be abnormal.
- 62 -