EDAN SE-601A - Power Supply and Performance Specs

SE-601 Series Electrocardiograph User Manual Technical Specifications
- 116 -
A1.2 Environment Specifications
Transport & Storage Working
Temperature:
-20℃ (-4ºF) ~ +55℃ (+131ºF)
+5ºC (+41ºF) ~ +40ºC (+104ºF)
Relative Humidity:
25%~93%
Non-Condensing
25%~80%
Non-Condensing
Atmospheric Pressure: 700hPa ~1060hPa 860hPa ~1060hPa
A1.3 Physical Specifications
Dimensions
310mm×322mm×101mm (12.2in×12.7in×3.98in)
Weight
Approx. 2.6kg (5.7lbs) (excluding recorder paper and battery)
Display
SE-601A: 3.5 inch STN LCD 192*64dot
SE-601B: 5.7 inch STN LCD 320*240 dot
SE-601C: 5.7 inch TFT color LCD 640*480 dot
A1.4 Power Supply Specifications
Operating Voltage = 100V-240V~
Operating Frequency = 50Hz/60Hz
Mains Supply:
Input Power = 70VA
Rated voltage = 14.8V
Rated capacity = 2200mAh
When the battery is fully charged, the electrocardiograph
can work normally for nearly 6 hours; and it can continually
print about 2 hours in the MANU mode or print about 280
ECG reports of 3×4+1rhy in the AUTO mode.
Charge mode: Constant current/voltage
Charge current (standard) = 0.28 C
5
A (600mA)
Charge voltage (standard) = (16.8-0.1V)
Necessary Charge time: 5 hours
Internal Li-ion Battery Pack:
Cycle life ≥ 300 times
Power Consumption: 70VA (max)
Fuse:
T1AL250VP Ø5×20