SE-601 Series Electrocardiograph User Manual Entering Patient Information
- 42 -
NOTE: In the AUTO or RHYT mode, when ID Mode is set to Manu and ID Hint is set to
On, if you do not input the patient ID, the hint will pop up to remind you to input the
patient ID when you press the START/STOP key.
6.2 Entering Other Information
When the main screen1 is displayed, press the function key F1 below Patient to open the Patient
Information window.
1. Press Tab or Shift + Tab to move the cursor to a textbox.
2. Fill in the selected textbox.
3. For SE-601A, press Tab or Shift + Tab to move the cursor to the Next or Prev button, and
then press Enter to turn the page.
4. After inputting all the information, press Enter to confirm.
To Next Page
Loading...
