SE-601 Series Electrocardiograph User Manual Switching On the Electrocardiograph
- 40 -
Chapter 5 Switching On the
Electrocardiograph
♦ When the mains supply is used, connect the power cord, and the mains supply indicator ( ) is
lit. Then press on the keyboard to turn on the unit. The equipment information such as
the device name, the version number will be displayed on the LCD screen after self-test. Then
the electrocardiograph is ready for use.
♦ When a battery is used, press on the keyboard directly to turn on the unit, and then the
battery indicator ( ) is lit. The equipment information such as the device name, the version
number will be displayed on the LCD screen after self-test. Then the electrocardiograph is
ready for use.
To Next Page
Loading...
