EDAN SE-601A - Page 53

SE-601 Series Electrocardiograph User Manual Printing ECG Reports
- 46 -
SE-601B / SE-601C Work Mode Setup Window
SE-601A Work Mode Setup Window
4) On the System Setup screen, press F1, F2, F3, F4, Tab or Shift + Tab to move the
cursor. When the cursor is on Lead, press Enter to open the Lead Setup window.
5) For SE-601B/C, press Tab or Shift + Tab to move the cursor to the Lead Sequence
item, and then press F1 or F2 to select a sequence.
For SE-601A, press F1, F2, Tab or Shift + Tab to move the cursor to the Lead
Sequence item, and then press F3 or F4 to select a sequence.
6) Press Enter to confirm.
SE-601B / SE-601C Lead Setup Window
SE-601A Lead Setup Window