1.2 Operating instructions
1. Operate the device only with original Metabo LiHD batteries
2. Charge the battery before first use
3. Insert and remove the cartridge at an angle of 15 degrees
4. To ensure optimal print quality maintain a printing distance of max.
6 - 8 mm to the print object.
5. Should excessive dust and ink accumulate on the print head (which causes the print image
deteriorates), clean the nozzle surface using the cleaning cloth supplied with the cartridge.
6. If the printing position on the product is incorrect, the print delay for the text must be
adjusted under Settings - Messages.
7. In the event of functional printer errors that cannot be corrected autonomously, please
contact your on-site/local distribution partner.
To Next Page
Loading...
