How to Use This Guide
– 4 –
Conventions The following conventions are used throughout this guide to show information:
Note:
Emphasizes important information or calls your attention to related features
or instructions.
Caution:
Alerts you to a potential hazard that could cause loss of data, or
damage the system or equipment.
Revision History This section summarizes the changes in each revision of this guide.
January 2024 Revision
This is the 13th revision of this guide. It is valid for software release v12.5.0 and
includes the following changes:
Added support for EAP111
Added RADIUS NAS ID, see “Wireless Networks — Security Settings” on
page 69
Modified Minimum Signal Allowed default, see “Physical Radio Settings” on
page 64
Added OpenRoaming captive portal, see “OpenRoaming” on page 57
Added OpenRoaming NAI Realm List Method/Authentication, see
“OpenRoaming” on page 57
Added Syslog Level, see “System Settings” on page 82
September 2023 Revision
This is the 12th revision of this guide. It is valid for software release v12.4.3 and
includes the following changes:
Added support for OAP101
Added SSID isolation, see “Physical Radio Settings” on page 64
Multiple PSK enhancement, see “Wireless Networks — Security Settings” on
page 69
To Next Page
Loading...
