Edge-Core EAP102 - Page 9

How to Use This Guide
– 9 –
 Updated wireless network settings, see “Wireless Networks — Network
Settings” on page 74
 Updated wireless open mesh settings, see “Wireless Networks — Open Mesh
Settings” on page 77
 Added Telnet settings, see “Telnet” on page 90
 Added web server settings, see “Web Server” on page 91
 Added multicast DNS, see “Multicast DNS” on page 95
 Added firewall settings, see “Firewall Rules” on page 50
 Added a guest network, see “LAN Settings” on page 48
July 2021 Revision
This is the second revision of this guide. It is valid for software release v11.2.0 and
includes the following changes:
 Added WPA3-Personal transition, WPA3-Enterprise, and WPA3-Enterprise
transition. See “Wireless Networks — Security Settings” on page 69
 Support for IEEE 802.11 k/r, see “Wireless Networks — Security Settings” on
page 69
 Added Minimum signal allowed (RSSI Threshold), see “Physical Radio Settings”
on page 64
 Support for Open Mesh, see “Wireless Networks — Open Mesh Settings” on
page 77
 SNMP v2 support, see “SNMP” on page 94
 Support for remote Syslog, see “Remote System Log Setup” on page 92
 Support for LLDP, see “LLDP” on page 95
 Support for management by an EWS-Series Controller, see “System Settings”
on page 82
April 2021 Revision
This is the first revision of this guide. It is valid for software release v11.1.1.