– 51 –
A TROUBLESHOOTING
DIAGNOSING SWITCH INDICATORS
Table 10: Troubleshooting Chart
Symptom Action
Pwr LED is Off
◆ Power supply is disconnected.
◆ Check connections between the switch, the power cord,
and the wall outlet.
◆ Contact your dealer for assistance.
Diag LED is Off
◆ Power cycle the switch to try and clear the condition.
◆ If the condition does not clear, contact your dealer for
assistance.
Link/Act LED is Off
◆ Verify that the switch and attached device are powered
on.
◆ Be sure the cable is plugged into both the switch and
corresponding device.
◆ Verify that the proper cable type is used and its length
does not exceed specified limits.
◆ Check the adapter on the attached device and cable
connections for possible defects. Replace the defective
adapter or cable if necessary.
To Next Page
Loading...
Need help?
General
