xi
Figures
Figure 1-1 Switch Front and Rear Panels 1-1
Figure 1-2 Port LEDs 1-4
Figure 1-3 System LEDs 1-5
Figure 1-4 Power Supply Sockets 1-6
Figure 2-1 Downlink Fiber Connections 2-2
Figure 2-2 Uplink SFP Connections 2-3
Figure 2-3 RJ-45 Management Port Connections 2-4
Figure 2-4 Making Private VLAN Connections 2-5
Figure 3-1 Attaching the Brackets 3-2
Figure 3-2 Installing the Switch in a Rack 3-3
Figure 3-3 Attaching the Adhesive Feet 3-3
Figure 3-4 Installing an SFP Transceiver 3-4
Figure 3-5 Power Receptacle 3-5
Figure 3-6 Serial Port (DB-9 DTE) Pin-Out 3-6
Figure 4-1 Making RJ-45 Port Connections 4-2
Figure 4-2 Making SC Port Connections 4-4
Figure 4-3 Making SFP Port Connections 4-4
Figure B-1 RJ-45 Connector Pin Numbers B-1
Figure B-2 Straight-through Wiring B-2
Figure B-3 Crossover Wiring B-3
To Next Page
Loading...