Edge-Core ES3526S - Appendix C: Specifications; Physical Characteristics

C-1
Appendix C: Specifications
Physical Characteristics
Ports
24 100BASE-FX single-fiber single-mode SC
Two 10/100/1000BASE-T RJ-45 shared with two slots for optional SFP
transceivers
One 10/100BASE-TX RJ-45 (management port)
Network Interface
Ports 1-24: single fiber SC connector
100BASE-FX: 9/125 micron single-mode fiber cable
Ports 25, 26: RJ-45 connectors, auto MDI-X
10BASE-T: RJ-45 (100-ohm, UTP cable; Categories 3, or better)
100BASE-TX: RJ-45 (100-ohm, UTP cable; Category 5, or better)
1000BASE-T: RJ-45 (100-ohm, UTP cable; Category 5, 5e, or 6)
Fiber Transceiver Specifications
Fiber Cable: ITU-T G.652 single-fiber single-mode (WDM)
Wavelengths: 1550 nm transmit, 1130 nm receive
Data Rate: 100 Mbps full duplex
Transmit Power: -14 to -8 dBm
Receive Power: -30 to -8 dBm
Optical Power Budget: 16 dB
Range: Up to 15 km
Aggregate Bandwidth
8.8 Gbps
Buffer Architecture
32 Mbyte per system
Switching Database
8K MAC address entries
LEDs
System: Power, Diag, RPU
Ports:
Link/Act, Remote Error
Weight
4.5 kg (9.92 lb)