O P E R A T I N G I N S T R U C T I O N S
INTRODUCTION PARTS DESCRIPTION INSTALLATION OPERATING INSTRUCTIONS INTERNET UPDATES APPENDIX
31
U S E R G U I D E
3
During programming, the CS/CTS device will go through a series of
screens telling you the actions it is completing.
The rst screen you’ll see will show Creating les, the second screen
will show Unlocking Module, the third screen Writing les, and
the fourth screen Programming complete. This process can take
several minutes depending on your vehicle year/make/model.
1
4
2
Your Evolution programmer has the ability to remove/adjust your
vehicle’s factory speed limiter. Removal/adjustment of the factory
speed limiter is intended for use at a closed circuit, legally sanc-
tioned racing environment. Even if racing in a legally sanctioned
racing environment, it is your responsibility to ensure your tires and
other vehicle components are rated to travel at increased speeds
with the speed limiter removed/adjusted.
WARNING: If you drive on public roads after removal or
adjustment of the speed limiter, you must still obey all driving laws,
including adhering to posted speed limits. To drive at racing speeds
on public roads seriously endangers you, your passengers, and others
nearby. Driving at high speeds with inadequate tires or other compo-
nents can lead to serious or fatal injury.
CAUTION: Removing/adjusting the speed limiter for purposes in-
consistent with the product’s intended function violates the product’s
intended use and will invalidate the product’s warranty. Edge Products
is not responsible for, or liable for the consequences of improper prod-
uct use.
After the CS/CTS device has successfully programmed your vehicle,
the programmed level number will appear on the main screen in the
level indicator box.
To Next Page
Loading...
