O P E R A T I N G I N S T R U C T I O N S
INTRODUCTION PARTS DESCRIPTION INSTALLATION OPERATING INSTRUCTIONS INTERNET UPDATES APPENDIX
47
U S E R G U I D E
Factor y Reset
If you would like to revert back to the factory default settings,
simply select Factory Reset and choose YES on the screen
above.
Many of the settings will be returned back to the defaults as
they were when the unit was new. Any changes you’ve made
to the alerts, the gauge screen displays, etc will be returned to
the defaults set by Edge Products.
NOTE: Factory Reset will not return the vehicle to stock from a
programmed Power Level. See Programming Power Levels section
for instructions to return to stock power level.
To Next Page
Loading...
