What to do if vehicle does not start after Edge Products CS programming?
If your vehicle doesn't start after programming with the Edge Products Touchscreen, the calibration might not have written correctly. Try selecting “Return to stock” from the programming menu, then program back to stock. Attempt to start the vehicle again. If the issue persists, further assistance is needed.
What to do if Edge Products CS camera picture is frozen?
If the Edge Products Touchscreen camera picture is frozen, it might be due to bad connections. Try cycling the key off and on. Also, double-check your fuse and connectors.
Why is there no display on my Edge Products CS when the key is in the 'on' position?
If you experience no display on your Edge Products Touchscreen when the key is in the “on” position, it may be because the unit requires manual activation. Touch the screen or start the vehicle. If the screen still doesn’t turn on, further assistance is needed.
Why does my Edge Products Touchscreen beep for two seconds?
If the Edge Products Touchscreen beeps for two seconds (long beep), it indicates that the unit is too hot from being in direct sunlight. Once the device cools down, the screen will turn itself on.
General| Brand | Edge Products |
|---|---|
| Model | CS |
| Category | Touchscreen |
| Language | English |
Important messages regarding safety or vehicle protection.
Rules for safe operation and installation of the device.
Details of the product's warranty coverage and terms.
Explains how aftermarket products affect vehicle warranty.
Benefits and instructions for registering the product online.
Overview of the CS and CTS device models.
Information on windshield mounts and accessories for CS/CTS.
Lists supplied items and suggested tools for installation.
Detailed physical and functional description of CS/CTS devices and components.
Details of Mini USB Cable, Compact Disc, Alcohol Pad, and Zip Ties.
Guides users on finding the vehicle's OBDII port.
Instructions for connecting and routing the OBDII cable.
How to position the device and mount on the windshield.
Attaching the mount to the device and connecting the OBDII cable.
Securing the device mount to the windshield.
Checking the device's position for optimal viewing and safety.
Managing excess cable and reassembling panels.
Diagrams and labels for CS and CTS device displays.
Explains the layout and buttons of the CTS device.
Overview of the main menu options and navigation buttons.
How to use the camera view feature on the CTS device.
How the alert system notifies the user of parameter deviations.
Accessing and viewing active alerts from the main menu.
Menu for programming power levels into the vehicle's PCM.
Descriptions of available power levels (Economy, Towing, Performance, Extreme).
Options to customize programmed power levels (Tire Size, Speed Limiter, etc.).
How to remove/adjust the vehicle's factory speed limiter.
Accessing diagnostic tools like Trouble Codes, Manual Regen, etc.
How to retrieve and clear diagnostic trouble codes (DTCs).
Explanation of passive and active DPF regeneration processes.
How to initiate a manual regeneration cycle for the DPF.
Instructions for running 0-60 and Quarter Mile performance tests.
Details on how to perform and interpret performance tests.
Identifies faulty injectors by analyzing fuel adjustments per cylinder.
Shows how to interpret injector balance rate readings.
Access to device settings like Alert Settings, Screen Layout, etc.
How to enable/disable alerts and set alert values.
Choosing from different screen display options and customizing parameters.
Changing screen backgrounds and using custom images.
Adjusting the screen's automatic dimming based on ambient light.
Recalibrating the speedometer for non-stock tire sizes.
Reverting all device settings back to factory defaults.
Customizing the delay time for the camera view on CTS devices.
Displays device firmware, calibration, and serial numbers.
Displays important vehicle information for technical support.
Provides website, address, and technical support contact details.
Tools for technical support, require specific numbers to function.
Software to update device firmware and calibration files.
Steps to complete the device update via Fusion software.
Information on "Update Required" and "Non-Stock Condition" errors.
Overview of expandable accessories and video-in jack compatibility.
Explains OEM EGT sensor placement for diesel vehicles.
Recommends pre-turbo EGT sensors and provides guidance on safe EGT readings.
Text describing sensor placement in various diesel truck exhaust systems.
Details of the Edge Products Backup Camera and its features.
Information on custom dash mounts for CS/CTS devices.
Common issues, possible causes, and solutions for the device.
To Next Page
