Edge Products CS - POSITION THE CONTROL UNIT

I N S T A L L A T I O N
INTRODUCTION PARTS DESCRIPTION INSTALLATION OPERATING INSTRUCTIONS INTERNET UPDATES APPENDIX
17
U S E R G U I D E
Step 3: Position the Control Unit
Position the device
and the mount on the
windshield in the desired
location.
Pay attention to
where the suction
cup will mount on the
windshield.
Once you’ve identied
the suction cup posi-
tion on the windshield,
use the supplied alco-
hol wipe to thoroughly
clean the area. After
you’ve wiped the area
clean, let it dry for 2-3
minutes.
*Select a location that will
not impair your ability to view
the road/traffic/pedestrians
while you drive.