Edge Products CS - SAFETY GUIDELINES

U S E R G U I D E
I N T R O D U C T I O N
INTRODUCTION PARTS DESCRIPTION INSTALLATION OPERATING INSTRUCTIONS INTERNET UPDATES APPENDIX
5
U S E R G U I D E
S A F E T Y G U I D E L I N E S
SAFETY GUIDELINES
1. Do not exceed legal speed limits on public roadways. Use any enhanced
speed capabilities of this product only in closed circuit, legally sanctioned rac-
ing environments expressly for this purpose. Loss of control from speeding
on a public road could seriously injure you, your passengers, or others on the
roadway.
2. Select a position on the windshield or dashboard to mount the device where it
will not impair your view. You must be able to see the road, trafc, and pedes-
trians without interference. Be sure your mounting location meets state and
local laws regarding placement of devices on the windshield or dashboard.
3. Do not operate the device while driving. Perform all adjustments or changes
while stopped. Changing a setting while under way can interfere with your at-
tention to roadway conditions.
4. “Stacking” performance-enhancing devices or other improper installation
could cause powertrain failure on the road. Other products may have features
incompatible with your Edge device. Follow all installation and operating in-
structions, and don’t stack products.
5. Some modications may affect other parts of your vehicle. For example, if
you remove/adjust the speed limiter in your vehicle, be sure your tires and other
components are rated for the increased speeds they will have to withstand. Not
doing so can lead to loss of vehicle control. Modify the speed limiter only for
use in closed circuit, legally sanctioned racing environments, not for use on
public roadways.
6. Do not use the Performance Tests feature to break any trafc laws. Perform
these tests only where they are legal and safe.
7. Some features may not function on all vehicle models. Check a newly-
installed device for all features you intend to use. Do not rely on their working
without checking rst.
NOTE: Dispose of this product consistent with local codes. Return to your
electronics supplier for proper handling.