Edge Technologies V-65 Series - Page 4

INDEX V-65E-A
Ⅱ
CONTENT（
（（
（INDEX）
））
）
5 ADJUSTMENTS AND SETTING
5.1 Structure of the bar feeder ------------------------------------------------------------- 5-1
5.2 Adjustment and selection of the bar feeder --------------------------------------- 5-2
5.3 Adjustment of bar stop ----------------------------------------------------------------- 5-2
5.4 Adjustment of bar diameter ----------------------------------------------------------- 5-3
5.5 Adjustment of push bar pressure ---------------------------------------------------- 5-3
5.6 Selection of push bar ------------------------------------------------------------------- 5-4
5.7 Optimizing remnant --------------------------------------------------------------------- 5-5
5.8 Maintain notice-key switch ------------------------------------------------------------ 5-6
6 OPERATIONS AND ILLUSTRATIONS
6.1 Material preparation -------------------------------------------------------------------- 6-1
6.2 Operation description ------------------------------------------------------------------ 6-2
6.3 Description of settings and parameter --------------------------------------------- 6-7
6.4 Refer alarm message ------------------------------------------------------------------ 6-23
7 ELECTRICAL CIRCUIT DIAGRAM
8 PARTS LIST