Edge Technologies V-65 Series - User Manual

Details the manual's contents and explains important marks used within it.

Identifies components and information found on the manufacturer's label.

Provides information on obtaining technical support and required data.

Provides a general overview of the V-65E/LE-A bar feeder's capabilities and design.

Details the physical dimensions of the bar feeder in millimeters.

Compares specifications for V-65E-A and V-65LE-A models.

Explains the requirements and connection for compressed air and power supply.

Illustrates and describes three methods for packing the bar feeder for transport.

Details methods for safely hoisting the bar feeder during transportation.

Outlines safety regulations and procedures for transporting the machine using a forklift.

Specifies requirements for the installation area, including floor flatness and space.

Provides initial instructions before installing the bar feeder.

Guides the user on how to adjust the bar feeder's height for proper alignment.

Explains the importance of correct distance between the CNC lathe and the bar feeder.

Details the procedure for precisely adjusting the directional alignment of the push bar.

Describes the steps for assembling and mounting the feeder's support frame.

Provides instructions on how to securely fix the bar feeder to the ground.

Covers installation for optional accessories like axial displacement and support stands.

Presents an exploded view and parts list for the bar feeder's main structure.

Details how to adjust the lever system for optimal bar feeding.

Guides on adjusting the bar stop to ensure correct loading of a single bar.

Explains the process for adjusting the bar feeder to match the bar diameter.

Provides recommended pressure settings for the push bar based on bar diameter.

Details how to select and change the appropriate push bar for different bar diameters.

Offers methods to minimize the remnant length of bar stock.

Explains the maintenance and function of the safety key switch.

Outlines precautions and requirements for preparing material before use.

Describes the Human/Machine Interface (HMI) layout and functions.

Provides a detailed description of each button and indicator light on the control panel.

Explains manual and automatic operation modes, including start procedures and emergency stop.

Illustrates the sequence of operations and interface signals for the CNC lathe working cycle.

Introduces HMI program selection and parameter adjustment.

Details how to navigate and select programs using the HMI interface.

Explains how to navigate and adjust various parameter settings via the HMI.

Details settings for 'Watch item', 'Finished product length', and 'Long feed safety'.

Details 'Short feed safety' parameter and password entry.

Explains system functions like 'Continue Machining', 'Language Select', and PLC/HMI version.

Covers program modification, testing, and setting bar end signals.

Lists alarm codes, their causes, and corresponding corrective actions.