14
In Automatic mode, the unit will cool, dehumidify, or heat (some models)
depending on the ambient temperature. The mode and fan speed will change
automatically. The front panel lights will change to reflect the running mode.
In Cool mode the unit will cool the room. The front panel lights will illuminate
blue.
In Dehumidify mode the unit will remove moisture from the air. The front panel
lights will illuminate yellow.
In Fan Only mode the unit will operate as a fan and circulate air. The front
panel lights will illuminate green.
Operating the Remote Control
Power
Use the Power button to turn the portable air conditioner on and
off.
By default when
you first use the Power button , the unit will begin
to
operate in cooling mode and the
front panel will be illuminated in
blue.
The unit will remember the last used mode / settings if
you shut down
and
restart.
Auto-Restart: If power to the unit is interrupted, the air conditioner will restart itself in its last
used mode / settings once power is restored.
The
compressor will restart after 3
minutes.
Cooling Mode
Cooling mode cools and dehumidifies the air. If the ambient
temperature
drops below the
temperature you selected, the compressor turns off
and
the unit functions with the fan only.
When the temperature rises above
the
temperature you selected, the compressor turns on
again. The front
panel
lights will be
blue.
Whether your desired temperature can actually be reached depends
on
the ambient conditions.
The room temperature remaining above the
set
temperature is
normal.
To operate the unit in cooling mode:
1. Make sure the power cord is plugged into a power outlet.
2. Press the Power button on the remote control.
3. Press the Mode button until the Cooling indicator is selected.
4. Select the Fan Speed by using the Fan Speed button .
5. Set the thermostat by using the Up and Down buttons. The thermostat is
adjustable between 64° F – 90° F in one degree increments. You can switch between
Fahrenheit and Celsius by pressing the button.
Note: The exhaust hose must be used during Cooling mode in order to cool a room.
To Next Page
Loading...
Need help?
General
