17
Timer
The timer can be used to either turn the unit on or off after a set number of elapsed hours. The timer
is adjustable between 1-24 hours in one hour increments.
How to Set the Unit to Automatically Turn On
1. Press the Timer button while the unit and the remote are powered off. The On
Timer indicator will be selected and the timed hour indicator will be blinking.
2. Use the Up and Down buttons to set the number of hours you want to pass
before the unit turns on.
3. Press the Timer button again to set the timer. The timed hour indicator will stop
blinking. After the selected time passes, the unit will automatically turn on.
How to Set the Unit to Automatically Turn Off
1. Press the Timer button while the unit and remote are powered on. The Off Timer
indicator will be selected and the timed hour indicator will be blinking.
2. Use the Up and down buttons to set the number of hours you want to pass
before the unit turns off.
3. Press the Timer button again to set the timer. The timed hour indicator will stop
blinking. The unit will automatically turn off after the selected time elapses.
Front Panel Lights and Controls
Front Panel Lights
Your portable air conditioner has a front panel that lights up
different
colors depending on the
mode it is
operating in.
Cooling mode will display a blue
light.
Dehumidify mode will display a yellow
light.
Fan mode will display a green
light.
Heating mode (on some models) will display a red
light.
Automatic mode will display the color of the current
mode.
If the unit flashes a red light and the unit stops cooling, this indicates
that
the internal water
reservoir is full. Place a pan under the unit, and
remove
the drain plug to drain the
unit.
If the lights flash from left to right and the unit does not work, contact customer service.
Note: To cancel the Timer, press the Power button or set the Timer to “00”.
To Next Page
Loading...
Need help?
General
