4
Installing the Carbon Filter
Your portable air conditioner ships with a pre-filter and an activated carbon filter. The carbon filter
will help remove contaminates and odors from the air. It is recommended that you replace the
carbon filter every two to three months, or as needed. It is necessary to clean the pre-filter
periodically. Follow the steps below to install the carbon filter.
1. Pull the handle on the pre-filter straight up.
2. Place the activated carbon filter on the pre-filter.
3. Secure the carbon filter to the pegs on the filter frame.
4. Insert the assembled pre-filter into the back of the unit.
Caution: Never operate the air conditioner without the pre-filter attached.
To Next Page
Loading...
Need help?
General
