Portable Air Conditioner 14
Operating the Remote continued
Fan Only mode is used to circulate the air in your room. No temperature
setting is needed.
To operate the unit in Fan Only mode:
1) Make sure the power cord is plugged into a power outlet.
2) Press the Power button on the remote.
3) Press the Mode button until the Mode indicator light turns green.
4) Press the Speed button to select the fan speed. You can choose
between High, Medium and Low. The LED indicator next to the speed will
light up.
The Speed button is used to change the fan speed while in Cooling and
Fan Only modes.
Press the Speed button to select the fan speed.
The timer can be used to either turn the unit on or off after a number of
elapsed hours. The timer is adjustable between 1-24 hours in one hour
increments.
How to set the unit to automatically turn on:
1) Press the Timer button on the remote control while the unit is powered
off.
2) Use the Up and Down buttons on the remote to set the time (displayed
in hours) you want to pass before the unit turns on. After the selected time
passes, the unit will automatically turn on.
How to set the unit to automatically turn off:
1) Press the Timer button on the remote control while the unit is powered
on. The Timer indicator LED will light up
2) Use the Up and Down buttons on the remote to set the time (displayed
in hours). The unit will automatically turn off after the selected time
elapses.
To set the temperature in cooling mode, use the Up and Down buttons on
the remote. The temperature range is adjustable between 61°F - 89°F in
one degree increments.
You can switch the temperature to be displayed in Fahrenheit or Celsius
by pressing the ºC / ºF Button.
Note: Default setting is in ºF.
NOTE: Fan Only mode does
not require that the
exhaust hose be attached.
NOTE: To cancel the timer,
press the Cancel button or
Power button.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
