What to do if my EdgeStar Ice Maker makes ice but doesn't fill the bin?
If your EdgeStar Ice Maker makes ice but the bin isn't filling, the condenser may be dirty and require cleaning. Also, check the installation to ensure proper airflow to the ice maker. High ambient and water temperatures, or proximity to a heat source, can also prevent the bin from filling.
Why does my EdgeStar OIM450SS Ice Maker stop suddenly?
If your EdgeStar Ice Maker suddenly stops while making ice, first check if the electricity is off and reconnect the power supply line if needed. Also, if the room temperature is outside the specified range, cut off the electricity and allow the ice maker to stop working until the temperature returns to the specified range.
What to do if water doesn't feed into my EdgeStar OIM450SS Ice Maker?
If water isn't feeding into your EdgeStar Ice Maker after it starts, check if the water supply tap is turned off and turn it on. Also, make sure the water supply pipe is properly connected; reconnect it if necessary.
Why won't my EdgeStar OIM450SS turn on?
If your EdgeStar Ice Maker isn't operating, first, ensure it is properly plugged in. If it is, check the fuse and replace it if blown. Also, verify that the power switch is set to ICE (ON). Finally, if the ice storage bin is full, remove some ice to free the ice-full probe.
Why is my EdgeStar Ice Maker leaking water?
If water is leaking from your EdgeStar Ice Maker, and you notice a few water droplets on the door, this may be due to humidity. Consider moving the unit or being more careful when opening the door. If the water supply connection is leaking, tighten the fitting.
Why are my EdgeStar Ice Maker's ice cubes partially formed?
If the ice cubes from your EdgeStar Ice Maker are only partially formed and white at the bottom, check if the water supply pressure is below 0.05Mpa. Also, inspect the water supply for restrictions, such as a clogged filter, and check for water leaks at the water trough.
How to reduce noise from my EdgeStar Ice Maker?
If your EdgeStar Ice Maker is making noise during operation, ensure the feet are leveled and locked.
How to prevent scale buildup in my EdgeStar OIM450SS?
If scale builds up quickly inside your EdgeStar Ice Maker, it may be due to a high calcium level in the water. Consider installing a water-softening apparatus in front of the water inlet valve.
Safety guidelines for electrical connections, grounding, and usage to prevent shock or fire.
Step-by-step guide for proper grounding of the appliance to prevent shock.
Detailed instructions for connecting the water supply hose to the unit.
Possible causes and solutions for the unit not turning on.
Possible causes and solutions for no water flow after starting.
Possible causes and solutions for the bin not filling with ice.
Possible causes and solutions for water leaks from the unit.
Possible causes and solutions for the unit's body becoming electrified.
To Next Page
General
