Important: Once you are ready to install it in a cabinet or directly on the floor, you must adjust the
feet to level the ice maker. If the floor is level, just revolve the two front feet to touch the floor.
Installation of Casters
Carefully have one person tilt the unit away from them while the other person helps to support it.
Make sure to give yourself enough clearance to insert the caster and tightly screw in clockwise.
Please follow the diagram pictured below.
Leveling the Ice Maker
It is important for the icemaker to be leveled in order to work properly. It can be raised or lowered by
rotating each of the four feet on the bottom of the machine .If you find that the surface is not level,
rotate the feet until the ice maker becomes level .You may need to make several adjustments to level
it. We recommend using a carpenter’s level to check the machine.
1. Place a carpenter’s level on top of the product to see if the ice maker is level from front to back
and side to side.
2. Adjust the height of the feet as follows:
Turn the leveling feet to the right to lower that corner of the ice maker.
Turn the leveling feet to the left to raise that corner of the ice maker.
3. If using casters, add washers to the threaded section and re-tighten
caster to raise that corner of the ice maker.
To Next Page
Loading...
