7
Reversing the Door Swing
Tools needed: flathead screwdriver, Phillips screwdriver
To Remove the Door from the Hinges
1. Remove the top hinge cover, then using a Phillips screwdriver, remove the screws and take off
top hinge. Keep the parts together and set them aside.
2. Lift the door off the bottom hinge and turn it upside down so that the handle is on the right. Set
the door aside.
To Replace the Door on the Hinges
1. Using a flathead screwdriver, remove the plug buttons from the screw holes opposite the
top door hinge and set them aside.
2. Using a Phillips screwdriver remove the screws opposite the bottom hinge and set them
aside.
3. Remove the bottom hinge, place on the opposite side at the bottom of the door.
4. Position the door on the bottom hinge.
5. Align the door on the bottom hinge and replace the top hinge and cover.
6. Push the plug buttons into the original top hinge screw holes, and insert the screws into the
original bottom hinge holes.
To Next Page
Loading...
