11
6. Using the Administrator Utility
The Administrator Utility allows users to search and setup the cameras located within the
Intranet or on the Internet. From the utility, users can view all the information of the selected
camera; furthermore, it provides a setting wizard, which can guide users to add the camera to
the network easily and promptly.
There are two ways to run the Administrator Utility as follows.
1. Click “Start”, select “Programs\IP Camera\Admin Utility” to run the utility.
2. Double click the “IP Camera Admin” icon
to run the utility.
Once the utility is started, it will search all the cameras within the network. To do more settings,
please refer to the description in the following sections.
To Next Page
Loading...
