69
Router/Gateway Port Forwarding/Virtual Server Setup
Name Protocol Port LAN IP
Setup 1 TCP 80 192.168.2.3
Setup 2 TCP 4321 192.168.2.3
Port Definition
Setup 1 It is the port of Web port. You have to configure the protocol to
“TCP”.
Setup 2 It is the port of Video port. You have to configure the protocol to
“TCP”.
Setup 3 It is the port for Internet Camera and Administrator Utility
communication. The protocol setting should be “UDP”.
Viewing Internet Camera via Web Browser
Setup 1/Setup 2 If you want to view the video via Web Browser, you have to
ensure the Router/Gateway has configured setup1 and setup 2. If
the web port is not default port “80”, but changed to 8080. The
remote user has to enter http://203.30.212.82:8080.
Viewing Internet Camera via Camera Viewer Utility
Setup 2
If you want to use Camera Viewer Utility to view the camera,
please make sure the Router/Gateway has configured setup2.
Setup Internet Camera via Administrator Utility
Setup 3
If you want to use Administrator Utility to configure the Internet
Camera via Internet, the Router/Gateway should configure setup
3.
To Next Page
Loading...
