Edimax IC-7000PT V2 - Dynamic DNS

32
2.3.3 Dynamic DNS
If your ISP does not give you a fixed Internet IP address (i.e. the Internet address you’re using when you
access the Internet is not always the same – ask your ISP for detailed information), you can use this function
to help you locate the IP address of this IP camera when you’re away from home or office.
Before you can use this function, you’ll need to apply for an account at dyndns.org (
http://www.dyndns.org).
Detailed instructions of how to apply a new account can be found on dyndns.org’s website.
The descriptions of every setting in this menu will be given below:
Item
Description
Enable DDNS
Select ‘Enable’ to activate Dynamic DNS function of this IP camera, select
‘Disable’ to disable it.
Provider
Select dynamic DNS service provider here. Only dyndns.org is available currently.
Host Name
Input dynamic DNS host name here.
User Name
Input dynamic DNS user name here, must be the same as the one you applied on
dyndns.org.
Password
Input dynamic DNS password here, must be the same as the one you applied on
dyndns.org.
Click ‘Apply’ to save settings and make the new settings take effect.