20
4. For computer users, the “Live View” screen will be displayed, as shown
below. On the live view screen you can see a live stream from your camera
and utilize various camera control using the icons down the left side.
Use the remote control to pan/tilt the camera
and adjust the viewing position.
Adjust the camera’s viewing position to any of
four preset viewing points. Presets can be
configured in Pan & Tilt Preset (refer to IV-
4-2. Preset)
Save a snapshot (image) of the network
camera’s current view. You will be prompted
to select a location to save the image.
Record video. You will be prompted to select
a location to save the recording. The icon will
display blue while recording, click the icon
again to stop recording.
Expand the live view of the network camera
to full screen mode. Press the “Esc” key on
To Next Page
Loading...
