- 29 -
Select the profile you wish to use, and click ‘Activate’ to use the profile you selected. You can only activate a
profile a time, and the profile that is activated currently will have a green check (
) before its name. If the
wireless access point is not reachable, a red check (
) will be displayed before its name.
If you want to change the connection parameters of a specific profile, just select it and click ‘Edit’ button, you’ll
be prompted to input the connection parameters, just like you’re creating a new profile.
If you no longer need a profile, select the profile then click ‘Delete’.
To Next Page
Loading...
