26
11.9.1 Default Value:
When you press [OK] key in the “Default Setting”
item:
1 There will pop a dialogue for you to enter the
password, and the default password is “0000”.
2 After you input the correct password, there will
show a warning message to inquiry you “The
operation will load default and erase all the
channels that user added, continue?”.
3 If you select “OK” option, the all revised
parameters of the receiver will reset to default
value. Please carefully to using this function.
4 In step 1 and step 2, press[Exit]key can draw
back from this item and without saving.
11.9.2 Delete All Channel:
When you press [OK] key in the “Delete All Channel”
item, it will pop a dialogue ask you whether confirm to
delete all channel. If you select “OK”, the entire channel
will be deleted.
11.9.3 Save default value
When you press [OK] key in the “Save default value”
item, there will show a message to inquiry you “Do you
want to set current database as default data?".If you
select “OK” option, it will to set current data as default
data
11.10 Information
1 When you enter to “Information” menu, you will see a
screen like above. The screen displays :MODEL
ID,S/W VERSION,H/W VERSION,LOADER
VERSION,LATEST UPDATE,STB SN,STB ID,VFD
Version.
2 Press [Menu] key to draw back to “System” menu.
To Next Page
Loading...
