Need help?Do you have a question about the EDM Solution 862 and is the answer not in the manual?
General| Brand | EDM |
|---|---|
| Model | Solution 862 |
| Category | Control Panel |
| Language | English |
Explains the status of zones 1-8 via codepad indicators and their definitions.
Details the AWAY indicator on the codepad and its definitions for system status.
Describes the STAY indicator on the codepad, including different modes and statuses.
Explains the On indicator for system armed state and alarm conditions.
Details the FAULT indicator, indicating system faults and acknowledgement procedures.
Lists and defines the various audible beeps from the codepad buzzer for system events.
Instructions for arming the system in AWAY Mode, covering two methods.
Details arming the system in STAY Mode 1, including automatic isolation.
Instructions for arming the system in STAY Mode 2 and programming zones for isolation.
Procedure for adding or changing system user codes, including Master Code.
How to activate the codepad panic alarm and installer options for disabling/silencing it.
Procedure for activating the codepad fire alarm and installer options for disabling/silencing it.
How to activate the codepad medical alarm and installer options for disabling/silencing it.
Procedure to enter fault analysis mode and identify system faults using zone indicators.
Detailed descriptions of various system faults like Low Battery, Fuse Fail, etc.
Enables testing of detection devices, providing audible and visual feedback.
To Next Page
