Edwards ELD500 Series

Declaration of Conformity
This product has been manufactured under a quality management system certified to ISO9001:2015
This declaration is based on the requirements of ENISO17050-1 and the relevant Directives
P200-10-169-C
Edwards Ltd,
Innovation Drive,
Burgess Hill,
West Sussex,
RH15 9TW, UK
The following product
Leak detection system – ELD500:
ELD500 WET, 200 - 240 V AC, 50/60 Hz D13510903
ELD500 WET, 100 V AC, 50/60 Hz D13510904
ELD500 WET, 100 - 120 V AC, 60 Hz D13510906
ELD500 DRY, 200 - 240 V AC, 50/60 Hz D13520903
ELD500 DRY, 100 V AC, 50/60 Hz D13520904
ELD500 DRY, 100 - 120 V AC, 60 Hz D13520906
ELD500 FLEX D13530000
Is in conformity with the relevant requirements of European CE legislation:
2006/42/EC
Machinery Directive
2014/35/EU
Low Voltage Directive
2014/30/EU
Electromagnetic Compatibility (EMC) Directive
2011/65/EU
Restriction of Certain Hazardous Substances (RoHS) Directive
Based on the relevant requirements of harmonised standards:
EN61010-1:2010
Safety requirements for electrical equipment for measurement, control and laboratory use.
General requirements
EN61326-1:2013
Electrical equipment for measurement, control and laboratory use. EMC requirements.
General requirements
Class A, Industrial Immunity
The product also complies with the following:
2012/19/EU
Waste from Electrical and Electronic Equipment (WEEE) Directive
This covers all product serial numbers from the date of this Declaration onwards.
03.08.2018, Burgess Hill
Peter Lamb
Senior Manager, Scientific Pump Technology
Date and Place