Edwards ELD500 Series

D135-10-880C - Operation
Page 75
Parameter save/load
Main menu > Settings > Parameter save load
Enables to save and load individual settings or reload the default settings.
Load parameter set
Main menu > Settings > Parameter save load > Load parameter set
Save the current parameter settings.
Save parameter set
Main menu > Settings > Parameter save load > Save parameter set
The settings of the selected saved parameter set will be displayed and can be reloaded.
Monitoring functions
Main menu > Settings > Monitoring functions
This Submenu explains the monitoring functions.
Softkey 2 to 4:
The names of the current values can be saved under a free selectable name. The saving of
3 different sets is possible.
Softkey 5: Load default values
The factory settings will be loaded again.
Softkey 6 to 8:
One of three saved parameter sets can be loaded.
Softkey 4: Edit a file name
Rename the parameter set.
Softkey 8: Save
Save the edited parameter set.
Softkey 6: 
Upward to the previous screen.
Softkey 7: 
Downward to the next screen.
Softkey No. 3: Maximum evacuation time
Settings for the gross leak measurement
Softkey No. 4: Contamination protection
Set the switch off limit and enable the function