Edwards TCU 40/80

4.7 Specifications
Parameter
Temperature ramp
Cooling capacity @
process equipment
ISO watt coolant line
losses; coolant water @
15 °C
Heating element
System flow
Process temperature
range
Setpoint resolution
Temperature regulation
Facility water
requirements
Power requirements
Ambient operating
temperature
Weight
Dimensions
Altitude
Max. relative humidity
Transient overvoltage
Pollution Degree
Sound pressure level
Conditions
Coolant short circuit conditions
+25°Cto+80°C
+25°Cto-30°C
Process coolant @ -40 °C
Process coolant @-20 °C to +80 "C,
@20 °C, 60 psig
+10oC(-0°+2°)to
+26 "C (+0° -2°)
3-phase delta (balanced load), 4 wire
(3 phases & earth gnd), 200 to 208
VAC, 50/60 Hz
Up to 31 "C
Above31°C
IEC 664, Installation Category II
IEC 664
At a distance of 1 meter.
Specification
Elapsed time: <25 minutes
Elapsed
time: <20 minutes
350 watts
2000 watts
2800 watts
3 gpm (11.36 lpm)
-40°Cto+80°C
±0.1 °C
± 1.0 °C typical
3 to 6 gpm
(11.36 to 22.71 lpm)
30 amp outlet
+ 10°Cto+50°C
450 pounds (204 kg)
22" wide x 30" deep x 35" high
(56 cm x 76 cm x 89 cm)
Up to 2000 meters
(6562 ft.)
80%
Derate linearly to 50% @ 50 °C,
2.5 kV
211
65dB(A)
14
TCU 40/80 Temperature Control Unit