EasyManua.ls Logo

Edwards SCU-801 - User Manual

Edwards SCU-801
149 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
MT-95E-001-A
SCU-801 Control Unit
Instruction Manual (C)
STP pump consists of the three-volumed Instruction Manuals.
Instruction Manual (A):
STP pump generic Instruction Manual
Instruction Manual (B):
STP pump specific information
Instruction Manual (C):
(This Instruction Manual)
STP control unit Instruction Manual
Copyright 2023 Edwards Japan Limited. All rights reserved. Printed in Japan.
2023.06

Table of Contents

Questions and Answers

  • F
    fcamposAug 7, 2025
    What to do if the FAILURE LED on my Edwards Control Unit doesn't turn off after a RESET?
    • R
      Rodney DeanAug 7, 2025
      If the FAILURE LED remains lit after a RESET operation on your Edwards Control Unit, try the following: * First, ensure the STP pump has stopped. * Then, switch the MAIN POWER "OFF" and then back "ON". * Remove the abnormality. * Perform the RESET operation again. * Perform the START operation and verify the STP pump operates correctly.

Edwards SCU-801 Specifications

General IconGeneral
BrandEdwards
TypeControl Unit
ModelSCU-801
ManufacturerEdwards
Input Voltage24 VDC
Output Voltage24 VDC

Related product manuals