Need help?Do you have a question about the Edwards TIC and is the answer not in the manual?
General| Display | LCD |
|---|---|
| Number of Gauge Heads Supported | 6 |
| Communication Interface | RS232, RS485 |
| Operating Temperature | 0 to 50 °C (32 to 122 °F) |
| Storage Temperature | -20 to 70 °C (-4 to 158 °F) |
Defines the scope and provides key definitions for the manual.
Details the TIC and DX Profibus modules, including variants.
Specifies electrical characteristics like voltage, power, and connectors.
Provides environmental limits for operation and storage.
Details physical dimensions and weight of the module.
Describes the types and pinouts of module connectors.
Guidance on checking package contents and module condition.
Instructions for physically mounting the module.
Details how to connect the module electrically.
Explains the requirement for Profibus bus termination.
Information on how the module operates within a Profibus network.
Overview of the startup process for the module.
Describes the symbols and functions on the module's front panel.
Instructions for setting the Profibus address using rotary switches.
Details supported baud rates and automatic detection.
Explains the modular software architecture and data exchange.
Summary of software modules available for DX pump control.
Summary of software modules available for TIC controllers.
Troubleshooting guide for common symptoms and faults.
Lists default configuration values for DX and TIC modules.
Procedure for updating the module's software.
Instructions for replacing the fuse in DX Profibus modules.
Guidelines for storing the Profibus module.
Instructions for safe and environmentally sound disposal.
Information on obtaining spare parts and accessories.
Lists available spare parts for the Profibus modules.
Lists available accessories for the Profibus modules.
To Next Page