Edwards TIC User Manual

D397-50-880 Issue C
Page 42 © Edwards Limited 2010. All rights reserved.
Edwards and the Edwards logo are trademarks of Edwards Limited.
This page has been intentionally left blank.
5.2 Factory defaults
DX PUMP VERSION
Table 18 - Profibus Module default set-up values (DX pump version)
TIC VERSION
Table 19 - Profibus Module default set-up values (TIC version)
Software
Module
No.
Parameter Units Default value
853 Vent Option Numbered
options
0 ( = Full vent when speed drops below 50% full
rotational speed for a stop command or a fail).
853 Ramp and Droop timer Minutes 8
853 Power Limit Watts 80 IF 75DX
160 IF 255DX
853 Effect if speed drops below
50%
Numbered
options
1 ( = Stop if timing period exceeded)
853 Brake Use Numbered
options
0 ( = Disabled)
869 Normal Speed Percent 80
869 Standby Speed Percent 70
Software
Module
No.
Parameter Units Default value
928 Front panel control lock Numbered
options
1 ( = Locked).
853 Vent Option Numbered
options
0 ( = Full vent when speed drops below 50% full
rotational speed for a stop command or a fail).
853 Ramp and Droop timer Minutes 8
853 Power Limit Watts 80 IF 75DX
160 IF 255DX
853 Effect if speed drops below
50%
Numbered
options
1 ( = Stop if timing period exceeded)
853 Brake Use Numbered
options
0 ( = Disabled)
869 Normal Speed Percent 80
869 Standby Speed Percent 70

Edwards TIC Specifications

General

Brand	Edwards
Model	TIC
Category	Control Unit
Language	English