Edwards TCU 40/80 User Manual

1 PREFACE
1.1 Safety considerations
Many safety features have been designed into the TCU 40/80 to protect the operator and the
equipment.
The following symbols are used in this manual to indicate the various safety conditions.
General Alert
General Alert symbol denotes the potential of personal hazards
or equipment failure.
Warnings are given when failure to observe the instruction
could result in injury or death to persons.
Cautions are given where failure to observe the instruction
could result in damage to the equipment, associated equipment
and process.
Statement on avoiding the hazard.
Electric Shock
Electric Shock symbol denotes the presence of high voltage or
current. It calls attention to the procedure, practice, or the like,
which if not done correctly or adhered to could result in injury
or death.
Statement on avoiding the hazard.
Eye Protection
Eye Protection symbol denotes a hazard which could cause
injury or irritation to the eyes.
Statement on avoiding the hazard.
Toxic Gases
Toxic Gases symbol denotes a personal hazard.
It calls attention to the procedure, practice, or the like, which if
not done correctly or adhered to could result in injury or death.
Statement on avoiding the hazard.
TCU 40/80 Temperature Control Unit

Edwards TCU 40/80 Specifications

General

Brand	Edwards
Model	TCU 40/80
Category	Control Unit
Language	English