MaxLoader User’s Guide
92
Inc Value: This value will be added to the previous data value
User must click on Auto Increment to program a memory with data increased
by one to the previous data.
Config / Hardware test
A hardware test is designed to assist customers in confirming and diagnosing
problems relating to all programmers. If a hardware defect with a programmer
is suspected, we recommend the users to run this test in order to confirm
whether or not a problem has occurred with the programmer.
Config / Concurrent (gang) mode
Since the technology for USB allows to make a hub port available in a PC, we
introduce multiple socket programmers, ProMax (4G, 8G), also multiple single-
socked programmers can be operated as GANG PROGRAM MODE while the
same model are connected in a USB hub(4 or 8) . With the Start key in USB
programmer, a programmer command stream such as
Erase/Blank/Program/Verify/Security can be executed without PC software
To Next Page
Loading...