EEC 6500 Series - Chapter 8: Appendix; Service and Maintenance; Conductor Sizes and Maximum Current List

41
CHAPTER 8: APPENDIX
8.1 Service and Maintenance
Users’ Protection
To avoid electric shock, do not dismantle the cover of the AC Power Source. When any abnormal
symptom happens on the instrument, please kindly contact EEC office or the authorized local
distributor for further assistance. Attached block diagram and wiring diagrams of 6500 Series AC
Power Source are for reference purpose.
Consistency of Service
6500 Series AC Power Source with the input circuit and all related parts are required to be
checked and calibrated at least once every year. This is to protect user in terms of safety and to
ensure a high accuracy of this AC Power Source all times.
Users’ Modification
Modification by user on the AC power Source internal circuits and parts are not allowed. The
warranty is void if the warranty seal is broken or the AC Power Source has been opened by
unauthorized person. EEC reserves the right to convert as original circuit and charge the
customer.
8.2 Conductor Sizes and Maximum Current List
6500 Series Input and Output Conductor (Wire) Size Specifications (Below environment
temperature 35ºC)
N.F.B
Conductor Size
10 A
1.25 mm
2
15 A
2.0 mm
2
20 A
3.5 mm
2
30 A
5.5 mm
2
40 A
5.5 mm
2
50 A
14 mm
2
60 A
22 mm
2
75 A
22 mm
2
100 A
38 mm
2
125 A
50 mm
2
150 A
50 mm
2
175 A
80 mm
2