Parameterization
Page 52 of 72 MSM-USM2G-BA-UK-004
5.3.3.2 Submenu “Reporting sequence” (only master device)
Fig. 5.16: Submenu “Reporting sequence”
In this submenu, the reporting sequence and the horn control are parameterized. In cascaded
systems, the same reporting sequence applies to all devices, which is why this submenu is only
available on the master device. In order to be able to adapt the sequences as flexibly as possible to
the respective requirements, these are composed of individual components.
For device and channel designation, all characters from A…Z and 0…9 are allowed.
The special characters „ { } | $ & # ; “ are not allowed. For channel designations, „\“
(backslash) is used as separation mark to start a new line.
To Next Page
Loading...