1.3 General safety instructions
General accident prevention measures
▪ Adhere to the current safety regulations of your
plant
.
▪ Never remove covers, safety equipment or other components from
the solar inverter!
▪ Report defects and irregularities immediately to the responsible persons!
User Manual
▪ Read the User Manual before working with the solar inverter.
▪ Always refer to the complete original version of this User Manual. Incomplete
versions or copies of individual pages do not convey all the information from the
User Manual.
▪ Observe the safety instructions and danger indications in this User Manual.
Operating personnel
▪ It is only permissible that the installation and connection of the solar inverter is
performed by trained electricians in accordance with the corresponding safety
regulations, standards and the domestic guidelines!
▪ The solar inverter can be operated by persons without prior experience.
▪ Ensure that the location of the solar inverter is sufficiently illuminated.
▪
Permissible operation and environmental conditions
▪ The solar inverter can only be assembled on stable and weight-bearing walls (e.g.
cement, brick).
▪ The device may only be installed on a clean, dust-free and dry site.
▪ The solar inverter must be installed in a well-ventilated environment, far from water,
inflammable gases and corrosive agents.
▪ In any case, it must be ensured that the installation site has sufficient air circulation
for the cooling of the device.
▪ Mind the distances between several solar inverters and that other devices located
in the immediate vicinity do not negatively influence the solar inverters (e.g. strong
waste heat).
▪ The solar inverter is only permitted to be operated in interior rooms. It is not
intended for use in dusty or corrosive environments or in explosive atmospheres.
To Next Page
Loading...
