U S E R M A N U A L E P S - D
Technical specifications and data are subject to change without any prior notice.
4
Installation
Mechanical
- Units in the sizes EPS150D-EPS900D should be wall-mounted
using the mounting angles provided. The bigger units; EPS1200D-
EPS2000D are in floor-cabinets but can also be mounted on wall
if so is necessary.
- Adequate arrangements should be made for the ventilation /
temperature control of the surrounding area. The unit is designed
for a temperature at around 20 ºC ambient with relative humidity
<90 % non-condensing. Higher temperatures can shorten the
lifetime of both components and batteries
- Access to the unit should be provided so that authorized persons
could regularly monitor the unit.
- The door key is to be stored in such a manner that no
unauthorized individual can access the inverter.
To Next Page
Loading...