EFKA DA320G5351
19
Operator Level
Parameter Designation Unit Limits Preset for Ind.
max min 100Ω 220Ω 680Ω 1000Ω
086 cF4 Number of stitches for bobbin thread stitches 25500 0 0 0 0 0 A ***)
monitor parameter 195 = 4
At this setting, the following functions will
be activated upon pressing the
appropriate key:
>1 sec. = Bobbin thread monitor function
is deactivated.
<1 sec. = Counter is set to preset value.
087 Intermediate backtack with counted stitches 255 0 0 0 0 0 A
stitches. At setting “0”, normal intermediate
backtack is active.
Note:
At the operator level, the parameter number (F-xxx) is not shown on the display, but the abbreviation (e. g. c2) and the
actual value (e. g. 002 for 2 stitches).
***) When programming the 5-digit (max) parameter values on the control or control panel, the 3-digit value displayed
must be multiplied by 100.
To Next Page
Loading...
