EFKA DA320G5351
18
5 List of Parameters
5.1 Operator Level
Parameter Designation Unit Limits Preset for Ind.
max min 100Ω 220Ω 680Ω 1000Ω
000 c2 Number of stitches of start backtack stitches 254 0 2 3 2 2 A
forward
001 c1 Number of stitches of start backtack stitches 254 0 4 3 2 4 A
backward
002 c3 Number of stitches of end backtack stitches 254 0 3 2 2 3 A
backward
003 c4 Number of stitches of end backtack stitches 254 0 3 3 5 3 A
forward
004 LS Light barrier compensating stitches stitches 254 0 4 4 4 4 A
(for long stitches)
005 LSF Number of stitches of the light barrier filter stitches 254 0 0 0 0 0 A
for knitted fabrics
006 LSn Number of light barrier seams 15 1 1 1 1 1 A
007 Stc Number of stitches for the seam with stitch stitches 254 0 10 10 10 10 A
counting
008 -F- A parameter from the technician level is assigned to 5 1 2 2 2 2 A
key 9 on the V820 control panel
1 = Softstart On/Off
2 = Ornamental backtack On/Off
3 = High lift for walking foot (only if parameter
250 or 255 = 11) oprational mode stored
= On / operational mode not stored = Off
4 = Needle cooling On/Off
(only if parameter 185 = 1)
5 = Signals A1 and/or A2 On/Off with slide-in
strips 1...4 (lefthand arrow = A1,
righthand arrow = A2)
009 LS Light barrier On/Off 1 0 0 0 0 0 A
010 cLS Light barrier compensating stitches stitches 254 0 8 8 8 8 A
(for normal stitch length)
013 FA Thread trimmer On/Off 1 0 1 1 1 1 A
014 FW Thread wiper On/Off 1 0 0 0 0 0 A
015 StS Stitch counting On/Off 1 0 0 0 0 0 A
023 AFL Automatic sewing foot lifting with pedal forward 1 0 0 0 0 0 A
at the seam end, if light barrier or stitch counting is
On
0 = Automatic sewing foot Off
1 = Automatic sewing foot On
080 SAv Number of start ornamental backtack stitches 254 0 3 3 2 3 A
stitches forward
081 SAr Number of start ornamental backtack stitches 254 0 3 3 2 3 A
stitches backward
082 SEr Number of end ornamental backtack stitches 254 0 3 3 2 3 A
stitches backward
083 SEv Number of end ornamental backtack stitches 254 0 3 3 2 3 A
stitches forward
085 cFw Number of stitches for bobbin thread stitches 5000 0 0 0 0 0 A
monitor parameter 195 = 1...3