ts and remedies
Page 37
English
6 Faults and remedies
If a problem occurs with the EFOY GO!, the red LED on the battery indicator flashes
and the four green LEDs display an error code. The LEDs display the error code for
one minute and then go out. To display the error code again for 30 seconds, start-up
the EFOY GO! and press the ON/OFF button on the right (grey) for longer than 3
seconds.
The EFOY GO! can be restarted by pressing the Power ON/OFF button on the left
(green) for longer than 3 seconds.
Consult the following list to determine what your error code means and what needs
to be done:
Error codes
No.
LED
Problem Description Solution
0
Battery flat The battery of your
EFOY GO! is flat.
Charge the EFOY
GO! up. Charging
options are
described in chapter
4.2 “Charging the
EFOY GO!
” on
1
Overheating
of the
inverter
The device has
switched off to protect
the inverter from
overheating
Wait until the
inverter has cooled
down.
Switch the EFOY GO!
back on.
2
Overheating
of the
internal
charger
The device has
switched off to protect
the charger from
overheating
Wait until the
internal charger has
cooled down. The
EFOY GO! switches
itself back on
automatically.
To Next Page
Loading...
