Eighteeth CuringPen - Handpiece operation

Błąd! Użyj karty Narzędzia główne, aby
zastosować 标题 1 do tekstu, który ma się tutaj pojawić. Błąd!
Użyj karty Narzędzia główne, aby zastosować 标题 1 do tekstu,
który ma się tutaj pojawić.
Page 15 / 30
7.2 Handpiece operation
After the handpiece main unit
is turned on, press to start
the light intensity output, and the
time will start counting down.
Press any key to interrupt the
output during the light intensity
output.
There is a beep every 5s
while working, and the output is
automatically turned off after the
countdown ends.
WARNING
⚫ When the device is
working, do not directly
illuminate the eyes,
otherwise it will cause
injury.
⚫ Do not directly
illuminate the skin,
otherwise high
temperature burns may
occur.
NOTE
⚫ After the device is used
continuously for 10
times at 2300mW/cm
2
, it
will be prohibited to use
the highest light
intensity output within 1
minute, Used to prevent
the lamp from
overheating
⚫ When using, the light
should be directly
irradiated onto the
curing dental resins and