3) Attach the scanning rod to the implant and scan from 1-2 teeth near the
scanning rod so that the system can identify the 3D model until completing
scanning and then remove the scanning rod.
Selecting to help scan accuracy when scanning high-light
surfaces such as implants, scanning rod.
6.2.5 Data editing
Reference to 6.1.4 Data editing
6.2.6 Scanning the bites
Reference to 6.1.5
6.2.7 Refine the 3D Model
Reference to 6.1.6
Page 33 / 51
To Next Page
Loading...